空壓機節能改造說說如何使用余熱回收的熱水

空壓機節能改造認為空壓機余熱回收是非常有必要的，但是在余熱回收過程中會產生熱水，那么這些熱水應該如何處理使用呢？空壓機節能改造廠家總結了幾點用法，我們來看一下吧。

Air compressor energy saving transformation that air compressor waste heat recovery is very necessary, but in the process of waste heat recovery will produce hot water, so how should these hot water be used? Air compressor energy saving transformation manufacturers summed up a few usage, let's take a look at it.

1、在機械加工時往往需要高溫?zé)崴由厦撝瑒﹣韺α闩浼M(jìn)行清洗，空壓機節能改造廠家認為脫脂的熱水溫度要求一般50-70度就可以了，而空壓機熱能回收所燒的熱水正好滿足這個需求，因為空壓機在運行過程中的油溫將達到80-100度，我們把這個油溫轉換成熱能來燒熱水溫度可達到70度左右。所以空壓機節能改造廠家認為把空壓機熱水器回收的熱水來用做洗清零件是再合適不過的。

1. In mechanical processing, high temperature hot water and degreasing agent are often needed to clean the spare parts. The manufacturer of air compressor energy-saving transformation thinks that the degreasing hot water temperature is generally 50-70 degrees, and the hot water burned by air compressor heat recovery just meets this demand, because the oil temperature of air compressor in the operation process will reach 80-100 degrees, we convert the oil temperature into heat energy The temperature of hot water can reach about 70 ℃. Therefore, the air compressor energy-saving transformation manufacturers think that it is more appropriate to use the hot water recycled from the air compressor water heater as cleaning parts.

2、還可以做為烘干零件的作用，空壓機節能改造廠家介紹空壓機熱能利用的熱能可以用水或者其它導熱體進行較遠距離的輸送，大多數金屬零件都是油鐵碳鋼或者是高速鋼等材質做的，這些材質遇水后很容易生銹，所以在清洗過后，需要馬上進行烘干處理，烘干過后再進行包裝或者進行下一步工藝加工處理，這樣才能保證零件的干凈、干燥，不生銹。

2. It can also be used as the role of drying parts. The air compressor energy-saving transformation manufacturers introduce that the heat energy used by the air compressor can be transported by water or other heat conductors for a long distance. Most metal parts are made of oil, iron, carbon steel or high-speed steel. These materials are easy to rust when they meet with water, so after cleaning, they need to be dried immediately After packaging or the next step of processing, in order to ensure that the parts clean, dry, no rust.

本文有山東空壓機的小編的介紹的，更多精彩內容可以關注：http://jz418.cn里面會有更加詳細的內容介紹，希望可以幫助到大家。

This article has the introduction of Shandong air compressor, more wonderful content can pay attention to: http://jz418.cn There will be more detailed content, I hope to help you.